ls980 flashed to d801 fully unlocked but lost fm radio please help topic

So i have the tmobile rom for a sprint phone to unlock gsm but now no matter what i try no fm radio ive been through the build prop got furnace kernal i know in my case its a software issue cause i hve the fm chip in my fphone any ideas how to reactivate the chip so i can listen again

[q] please help -- bricked -- topic

well, I was installing a aosp jelly bean rom and I installed the boot.img first and then flashed the rom, but the rom said that the install was aborted due to bootloader issues or something. I then tried to restore my nandroid backupand that put me stuck on the htc screen on bootup. I then tried to install stock recovery as a guide told me or something and it got rid of my backup. I have no idea what to do. I have reflashed CWM and can boot into the bootloader and the recovery. How can I install a new rom or a stock rom to make this work. Please help!

My main number is this : 4.18.401.4
my hboot version is 1.72.0000
my radio version is 5.1204.167.31

Bricked - Tried Everything, Please Help topic

Ok fellas, I'm definitely bricked here. I went to flash TWRP (before brick) and that's when it happened.

So if I just turn the phone on it goes the the Samsung Galaxy S5 initial screen and is stuck. (def no boot loop)

I've downloaded the stock firmware (yes it's the correct one) and all Odin's 3.07 - 3.10. (ran as administrator)

I've uninstalled \ reinstalled usb drivers several times, Kies is completely uninstalled.

The problem in ODIN (any version I use), is that I add the firmware, run it and get the same thing every time:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Any ideas on how to fix this thing?

Phantom Files On Internal SD. Please Help. topic

Attachment 3116361

My wife's phone's internal SD filled up with some rogue phantom files that wasn't accessible or even visible with file browser app on Stock firmware.

I decided to root and flash with CyanogenMod - being sure to format the system in the hope that those rogue, phantom files were wiped. This didn't work and the attached picture is its current state showing only 2.62GB available where there should be around 8GB available.

Can anyone shed some light on this perplexing issue.

Many thanks

Sent from my GT-N7105 using XDA Free mobile app

Attached Thumbnails

 

[Q] Please help, Asus TF101 bricked? topic

Hi,
I need to get a recovery or new rom installed.... but ive run into some problems.
I'm really hoping that somebody could help, I've got a Asus TF101 that won't boot past the asus screen.
I can get into apx mode, but I dont think that helps me as I'm pretty sure mines an SBK2 (serial C30)
I have CWM installed, which I installed using Rom Manager, it seems to be faulty, It wont mount sd card or successfully wipe data / factory reset. which is where my problems started.

any help getting this thing back online asap would be greatly appreciated. Its not mine, was doing a favor for a friend.

thanks.

[Q] Help please ! topic

My huawei ascend p7 have version P7-L10v100R001C00B116SP03 and i dont get any update Firmware ... i m from Romania :angel:


P.S : i buy this phone with B121 after update to B126 i get cust error and i send the phone to service and he change my motherboard .... im scary to update again and get error help me please :(

Please contact me if you can help me : https://www.facebook.com/joesafadijoe

[Q] Note 2 N7100 Bricked. Please Help. topic

Hi, I have Samsung Galaxy Note 2 N7100. Region: India

I had rooted successfully.
Updated SuperSU-v2.14.
Flashed Note2-CWM-6.0.4.3-GT-N7100.
Made a backup Rom using CWM.
Then I flashed AllianceROM_N7100_DME6_v4_RePack_a,
Perseus-alpha35-n7100-CWM and GT-N7100_XXDME4_Modem.
Everything was perfect till here.

Then i decided to flash photosphere and did it using TWRP.
After reboot I had issues with the network, somehow I was not able to connect.
I thought I had issue with the modem, so I tried flashing different modems.
Nothing seemed to work.
Then I wiped in TWRP and I reflashed AllianceROM_N7100_DME6_v4_RePack_a.
Still the same. Then I wiped again and flashed Note2-CWM-6.0.4.3-GT-N7100 and tried to restore my backed up rom. But now after booting successfully all my google apps started to force close and hanged.
Then I wiped again and this time flashed AllianceROM_N7100_DMA6_v1_2.
Everything else seemed okay except the network problem, I was unable to connect.
Then I tried to flash a stock rom using odin: GT-N7100_INU_1_20120921181332
During the middle of the update it hanged and showed fail error.
Now shows:
Firmware upgrade encountered an issue. Please select recovery mode in kies and try again.
I tried recovering via Kies, but it doesn't detect my device.
I also tried different versions of odin, tried uninstalling kies, updated my samsung drivers, tried various firmwares.
But every time I get the fail error in odin.
It shows:

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUFNL1_N7100ODDFNI1_N7100DDUFND1_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> tz.img
<ID:0/003> system.img
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Please help me. What should I do now? Thanks a lot in advance.

Attached Thumbnails

 

[Q] PLEASE HELP ME, device bricked, no nandroid backup topic

I run a Micromax Canvas Tab P650. I committed an error.

I edited the build.prop file and changed the whole of that to that of Nexus 5. Now, when I rebooted, my GUI became very strange and apps stopped to work. Somehow, I re-edited my build.prop file and pasted the original content. Now, when I reboot, Nothing appears but Canvas Tab(the boot screen).

I do not have any nandroid backup.
I do not have CWM OR TWRP.
Please help

[Q] I can't restore back to stock please help! topic

So to clear things out my phone is not bricked it is currently rooted and has twrp recovery installed. I've been trying to restore it back to stock but the lg recovery tool will load my kdz file everything goes good then it tells me it can't detect my phone. I already installed and the usb drivers and still nothing I even tried enabling usb debugging mode and it still don't work. I also tried flashing in offline mode and it does the same thing it just wont detect my lg g2 can someone please help me out i want to send it in for warranty purposes but i need un-root it before i send it in thanks.

need help with galaxy s 3 please topic

my nephew rooted my phone (little turd) I thought I bought it that way. so.... the phone updated on its own and when i woke up it was stuck on att logo, I reset phone, battery out,and hard reset nada nothing, so I sent it to shop not at&t seems how where I live it would take 5months to get there and back not to mention no warranty seems how he messed with it. The guy flashed it and got it working but when I got it back it says no sim please insert the sim is good, I downloaded phone info, i read it on this site and there is no baseband,imei,modem board can anyone please help me please I have a decent understanding of computers and software I need proper direction thank you so much in advance

from lawrence in kodiak alaska

Phone soft bricked Please help !!! topic

Okay so i rooted my Moto Atrix 2 yesterday to install custom ROMs. After rooting and installing Bootstrap when i tried to install the new ROM it said signature verification failed and now the phone loads in utility recovery and shows the same error.What should i do ? I need this phone back desperately as i don't have a spare phone as of now

[Q] Help with Seriously Bricked Moto DEFY, PLEASE READ! topic

Hello,

i know there has been a lot of Bricked Defy posts and i've read them all. I think my Defy is really Dead.
I had my stock Defy and wanted to instal Kit Kat on it. So i followed some you tube instructions and made it work., the only problem is that i did not have Data working any more, i could make calls but no Data., So, i decided to restore my previously created nanobackup (is that how it's called) anyway, it failed, gave me some errors and my phone was then stuck on the M screen.
As i previously made it work, i grabbed the SBF i had and flashed it using RSDLite and now my phone is dead :crying:
I first thought that my battery was dead, but i have performed the MacGiver method and i can see the phone on RSDlite and i can re-flash it, but nothing happens, when the flash finishes, it reports "PASSED" and the phone remains dead.
as i read in other posts the phone is not booting because my SBF is older or something, but i cannot find any newer SBF, i have the following:
JRDNEM_U3_3.4.3-33-INESE_SIGN_SIGNED_UCAJRDNEMARAB1B50AA03A.0R_PDS03C _USAJRDNFRYORTINT15_P001_A013_HWp3_Service1FF.sbf. gz
JRDNEM_U3_3.4.2_145-012_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B5TEL03B.0R_PDS 03C_USAJRDNFRYOTELSTRA_P013_A007_M003_HWp3_Service 1FF
and
DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03 C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF

Since had kitkat working for a while, do i have to find a much newer SBF, some newer than Kitkat or what should i do.

Any help would be greatly appretiate it.

thank you

Encryption problem... Help please topic

Hi guys I recently flashed cyanogen mod 12 on my m7 and I tried to decrypt it, After some googling I read a few times that was the way to decrypt it..

I factory reset it from the settings menu on the rom and the bootloader, Problem now is I can't access my SD card from the recovery menu etc meaning I can't restore or flash a rom to boot

I'm stuck and appreciate the help if available

Thanks.

Sent from my SM-N9005 using XDA Free mobile app

[Q] Lg f180L signal come and go Help Please! topic

Hi friends I have lg f180L and its on stock 4.4.2 .....it was running fine but 2 days ago it started to loose signals....every time I reboot its shows network and full signals for 2-3 minutes and then goes to searching.....I have reflashed baseband and rom too but no luck...

[Q] [q] sm-g900f / sm-g900w8 help please! topic

Hi there, I hope I am doing this correctly, if not, please tell me how to do it correctly and I will fix it.

I got an S5 on kijiji, I know it was legit. The guy got it from Wind. He flashed the **** out of it and now the fingerprint and other stuff doesn't work. I want to put it back to absolute Wind stock just for peace of mind and to use all features.
When I checked the model number in the settings it said it was SM-G900F, which makes no sense seeing as he got it from Wind. I downloaded the stock G900F ROM but when I was about to use Odin, the phone said in Download mode that it was G900W8. *panicking intensifies*
I e-mailed him and he said he FLASHED THE KERNAL to SM-G900F from SM-G900W8 because there is more development for the european F model.

The whole problem with this is that I want to go back to absolute stock and get the OTA updates. I am fairly squeamish when it comes to this sort of things. How do I flash the kernal back to G900W8. Or should I not even bother? What are my options? Please help. I am squeamish but I'm not stupid. I can follow instructions. I am downloading the stock G900W8 ROM now so that I'll have both and be ready.

Please I need help. I do not get to do dual boot in i9500 topic

Good evening friends Xda
I have the following problem.
I tell them that I have the galaxy s4 i9500 rooted and arrow rom v16
Kernel Perseus-alpha19.1-i9500-CWM
I have the romswitcher you download from play store installed
I followed all the steps, modifying the file updater-script
And I want to install a secondary rom the rom pacman 4.3 cyanogenmod supernexus 4.3 or 4.3.
When I reboot into recovery when trying to install one of these rum and modified their respective updater-script me a bad mistake
Nose what else to do, someone can help me, of course thank you very much

Pd: below some pictures that capture the steps I did.

Attached Thumbnails

 


 


 


 

Could anyone help me please ? :) topic

Hello guys.. I have some problems about my samsung wave 2.. I think it is bricked but i m not sure.. Here you are some information about my problem:
-when i take charge to phone sometimes it says "file not found" or nothing happend..
- i tried to flash or something but nothing happend again
I read about jtag or something else but i could not understand my problem yet. Could any one help me about this case what is my phones problem how can i fix it? thank you..

[Q] GoClever Quantum 400 Lite Won't turn Please Help ME!!!!!!!!! topic

I click on SP Tools on Download to put Recovery CWM 5.5...on my Quantum 400 Lite and on the screen appear Succes/OK and CWM Work but i installed some roms for MT6572(my cpu) and my phone my phone restarting 4-5 seconds moooore times.................But when i click Format (format whole flash) on the SP Tools my phone has shutted down and won't turn 3 days ago :crying: :crying: :crying: :crying: :crying: :crying: Pleaseeee help meeee i used 20 softwares but NO RESULT PLEASE GIVE ME CORECT FILES AND SOLVE ME PLEASEEEEEEEEEEEEEEE :confused: :confused: :confused: :crying: :confused: :crying: :confused: :crying:

SORRY FOR MY BAD ENGLISH :crying: :crying: :crying: :crying: :crying: :crying:

[Q] please help me topic

hi guys
i have chinese tablet model action
i install sony tablet z bootanimatin on my tablet and now my tablet has a boot loop(its not boot up and play boot animatin again and again) and i can fix it
my tablet is not going to recovery mod
what can i do???
i need my tablet
can any one help me please :crying:
sorry for my bad english :crying:

[q] help me please ??? topic

THIS PICS BELOW ON MY PHONE IN DOWNLOAD AFTER I FLASHED LoLlipop firmware can i get back To KK safe without soft and hard bricking