Weird display brightness issue topic

Hi all, yesterday i noticed a problem regarding display brigtness: i saw that below 24% value, brightness is set automatically to 0%, i mean..i can set from 0% to 23% but brightness doesn't change at all, it's like always set to 0! Upper 24% it is ok.
It's nothing tragic but is still a problem and i don't see where i'm messing.
I'm running cloudyg3+dorimanx.
Any help would be appreciated.
:)

[Q] New type of Boot logo hang issue topic

I am getting a hang on the bootlogo
This happened after installing the OTA for 44S. if I boot reboot the phone 20 or 30 times I can get past it.
TWRP works fine. if you pay close attention when booting into recovery you see the 1+ logo, and just before TWRP loads the screen goes slightly brighter.
When booting into system, you usually see the 1+ logo, and then the screen goes slightly dimmer. Just after this the logo should change into the rotating animation.. This is where my phone hangs. Just after it goes dimmer but before the logo starts to animate.

Now here is the weird part. I've done all the tricks, returning to stock 44s deleting all the partitions and re creating them, deleting cache, dalvik, flashing a persist.img or manually creating that partition, etc etc. after many days of crying and swearing I flashed stock 38R. it boots 100% of the time. I flashed Calkulins 44S rom, back to hanging on boot. I then restored ONLY the boot partition from 38R, and my phone boots 100%
I can't stay on 38R boot/kernel as I have the jumpy touch screen and a few other bugs which 44S fixes.

Does anyone have any ideas?
In a nutshell, 44S boot hangs 95% of the time.
38R boot image works all the time for booting (but I need the bug fixes from 44S)

(working kernel: 3.4.0-cyanogenmod-g33fa374 build04@cyanogenmod #1 mon Oct 6 11:03:38 PDT 2014)

Weird Camera issue. topic

I have the option to save my photo's to external SD which was working well until recently. So what is happening is, I take a photo and it appears in gallery but after reboot it is gone.

I'm sure this is an easy one for you, but any help would be greatly appreciated.

Kind Regards

Graeme.

[Q] official update issue with verizon topic

My friend accidently bought HTC one M8 verizon from UAE, the phone is new with kitkat 4.4.2, everything is fine but when he tried to update the rom, it failed and says that software update only works in CDMA mode, this is what i actually dont understand, is this locked or unlocked mobile? and is there any possibility to unlock this phone like normal unlocked M8?

Lte issue on usa version topic

Hi guys!

Im having this issue. *#*#4636#*#* when i dial this code it let me access to select what type of network i want. So i want to force to use LTE Only, but the signal get lost, not signal anymore. But when i change it to lte/gsm its works again. I know i have lte in the area but i cant get it in that way. Can anyone ccan try that and reports back if let u chanche the network? Thanks.

Sent from my Nexus 6 using XDA Free mobile app

Attached Thumbnails

 

[Q] Samsung Galaxy s 4 issue with mobile data topic

recently my samsung galaxy s 4 on the carrier US Cellular and running the stock android version 4.4.2 has stopped communicating with 4g lte. It will show that there is a 4 g lte connection but will not connect to facebook messanger or do anything internet related. It will occasionally drop to 3g and work fine or drop connection all together.

In my attempts and large amount of research to fix this problem i have done the following:
1. Turned on and off airplane mode
2 restarted the phone
3. Replaced SIM card with a new one
4. Factory reset my phone
5. Erased application cache in the recovery mode
6. I have also tried to change the network mode and yes mobile data is turned on.

Please help. Us cellular is just telling me to buy a new phone that i cant afford because they dont know whats wrong and samsung is saying the same thing. ***Also it is not a rooted phone*****

[Q] Strange power on issue topic

I've inherited a HOX which I'm trying to set up for my wife to use. It has a very unusual issue, when plugged in either to a charger or a PC, it shows no indication of charging - i.e. no red LED. On a PC, it intermittently gets picked up as an unknown device - or more correctly 3 unknown devices, maybe mass storage, composite & MTP? Not sure cos it doesn't pick up any device info. As I say it is intermittent which suggests the micro-USB socket might be at fault.

But there is evidence that it is accepting a charge because every 10 minutes or so the phone vibrates and displays the initial start-up screen i.e. white background with HTC logo & it doesn't get past that. It doesn't show the 'Quietly brilliant' screen first like on a regular start-up. The screen stays lit for 3 minutes or so, then it flickers and turns off. Then it turns on again about 10 minutes later and goes through the same cycle. It does this continually when plugged in. I've also tried charging using the 2 end dock contacts and it goes through the same cycle. Also, the battery & board are both warm but not hot.

I've ordered a replacement USB socket which is easy to fit as its not soldered - this might help with PC access.

I've also tried using a variety of button combinations, but the buttons seem to be completely inactive and don't do anything either when it's in the 'on' or 'off' mode.

Any ideas? I've searched and haven't come across anyone else experiencing this issue.

camera apk issue topic

Hi ive done a mistake, nevermid how but how can i delete this 1 timeshift from camera apk?
Attach screen, its a bit annoying. Thanks for response...

Attached Thumbnails

 

[Q] General Mobile Data Issue, Baseband Problem? topic

Hi at all.
This is my first Post, but i cant get any further with my Problem.
I used to have cm11 on my I9305 (T-Mobile Germany), everything worked fine (more or less).
Last Month from one day to another my Baseband completely disappeared without any obvious reason.
Luckily I had a Backup that worked with unofficial cm12 rom.
After that nearly everything worked.
Now, since 2 Days i got a new Problem. Everywhere where I got 4G, my Mobile Data work. But in Areas where I only got H+, 3G, Edge,
I have to switch my preferred connection to 2G, else my Data wont work. Sometimes for Seconds i see the 3G Logo, light up the Status Bar.
But I got no Connection.
The Strange Thing is, that when I call Someone, during the Call, the H+ Connection seems to work, but after the Call, it disappears.

And my WLAN Connection works only after every reboot (Connects, but no Internet, Also very disappointing)

Things I did yet:
-Flashed various Modems for I9305,
-Flashed different Roms (CM11, Nameless Rom, Resurrection Remix)
-Smashed the d*mn thing against the Wall ;):angel:

Information from my Phone:
-Baseband Version: I9305XXALK2
-Mobile Network Type: UMTS (it shows that, but no connection)
-Mobile Network State: Disconnected
-IP: Unavailable

Has anyone encountered a similar Issue, or a Solution?
Could it be a Hardware Problem?

[Q] V500 recovery install issue. topic

First of all let me make clear that I have installed recovery(TWRP) on the same device once. But I had to completely unroot(removing TWRP). Now that I'm again rooted with Stock ROM v4.4.2 and model number as V50020d. I tried to install TWRP(source: http://forum.xda-developers.com/show...8267&nocache=1) from POST#1 and Step#3, but failed. I edited the .bat file to run with model number, v50020d. It ran every command, rebooted. But what I could see was system recovery. What's the problem here?

Thanks for the help :)

iOS FireTV remote app issue topic

I have this annoying issue that my Amazon Fire TV is connected to my router with an ethernet cable for optimal network performance, yet on the other hand this makes it not discoverable when using the iOS app to find the Fire TV since the latter is not connected to the same SSID. Any suggestions?

[Q] Wake issue during phone calls topic

I am unable to wake the phone during a call. As soon as I answer a call, or press the call button my screen turns off. I can not wake it with proximity sensor, double tap or power button. There is literally no way to turn on the screen once a call has started. It was random when it started. I had been using Vanir for a while and then one day it started on my phone, and never left. I have even flashed my OG nandroid stock and the issue was present there after flashing to that.

I have swapped ROMs, AOSP x4, BarRin, Stock, you name it, but to no avail. I have cleared everything off my internal, wiped the internal memory, sideloaded a ROM back from scratch and booted up plain jane... same issue.

I am attaching a link to a logcat incase anybody has any ideas. I'm simply lost with this, and it is a major issue considering every time I make a call I have to be ready to take the case off so that I have faster access to pop the back off and battery pull. This is not a way to live.

PLEASE if someone has any ideas on how/where to go about fixing this, I will be grateful.

Attached Files

	device_info.txt - [Click for QR Code] (715 Bytes)
	logcat.txt - [Click for QR Code] (232.0 KB)

Backlight issue topic

Hi,
I have a problem with my S4 Active, my backlight is off....service told me that the problem is that the motherboard is bend, so the contacts for electric for backlight are off...is there anz description how to fix this?

Thanks Jiri

Gap issue common? topic

Sorry for the post but are you guys having any construction issues like gaps on the top back?
Here is a pic to give you an idea. Thx

Attached Thumbnails

 

issue sound !! topic

Hi all

I have problem with the sound i set the volume max but when I receive calls or msg sometimes the sound be low and sometimes be loud

is all have this problem or just me ?

sorry for my bad english

Sent from my Nexus 6 using Tapatalk

[Q] issue with BT connection with car stereo (lp - cm 12 based roms) topic

hey every one, need an advice !!
LG G3 D855
every rom i used, i had a wierd issues with bt connection with my car audio.
when i recieve a call or notification, after that the sound of the stereo becomes distorted and with noisy sound, i need to stop the music player and start it again, after i came out the car i always need to reboot the phone becouse its become silent.
another one is between connections with the car stereo (couple of drives) i need to reboot the phone couse it playing the music but with no sound from the car stereo. after a reboot its starts playing ok.
please, any advice !!!
Sorry for my crapy english

Signal Issue topic

Hey guys, I've been facing issue with my s3 Mini gt-i8190n after i flash a custom rom. Meanwhile, while in the custom rom period i don't seem to get any signal at all so i actually flash back the original samsung firmware.

Now i'm using the original samsung firmware and i facing low signal and sometimes no signal issues.
Carrier : Digi
Country: Malaysia

Lockscreen Issue topic

So I enabled a PIN lockscreen to add a little security to my Z3 Compact but it resulted in the device becoming far more secure than I intended. The pin I chose was simply "1234" input with the standard english qwerty keyboard on the device, when I try to unlock the phone using the numerical keypad on the lockscreen however it tells me that the pin is incorrect. I'm currently locked out of my phone and don't know what I can do besides resetting back to factory state, which I don't particularly want to do! Any help would be much appreciated!

headphone jack icon on notification bar issue topic

so today I got this strange headphone jack icon on the notification bar for no reason: I hadn't had headphones in the phone for weeks, and it popped up. I tried restarting, shutting down and turning back on, and finally trying headphones and taking them out, and nothing works. What's the deal? I also notice I can't play my music anymore without headphones.

[Q] progress bar issue topic

Is there the opportunity to build a progress bar for negative range? I would like to use it for weather (one bar for positive temperature and another one for negative). With positive range everything is OK, but for negative values it doesn't work..
I was trying to do it for values from "0" till "-50"
The progress bar is painting at full length although the current temperature value is about several degrees below zero....
This is the progress bar's settings when the temperature is about zero:
Attachment 3111572

Attached Thumbnails