i flashed the wrong baseband and rom by mistake. how? well i rename it and got confused and mix it with other roms.well the point now is my lg g3 is bricked and i need help to get it back to life please anyone help
Affichage des articles dont le libellé est Unbrick. Afficher tous les articles
Affichage des articles dont le libellé est Unbrick. Afficher tous les articles
[HELP] Moto X bricked. How to unbrick it? topic
let me explain what exactly happened. l was running LiquidSmooth v3.2 on my Moto X. I have flashed few roms previously as well. I was facing no issues whatsoever but still wanted to upgrade to LiquidSmooth v4.0. So this time when I got on fastboot menu
and chose recovery, I got invalid kernel/ ramdisk size error. I was not able to enter recovery menu and this has happened to me for the first time. I chose normal reboot and then even the phone was working fine. But now, things have gone worse. I entered fastboot menu again and by mistake chose factory option instead of recovery. Phone started rebooting i think. As i had installed LiveLog app on my phone all I could see was logs on the screen. I waited for around 45 minutes but phone didnt boot up. I switched off and restarted again but same result. I think it is bricked. Is there any way I can get my phone back to working state? Any kind of help would be appreciated.
Thanks.
and chose recovery, I got invalid kernel/ ramdisk size error. I was not able to enter recovery menu and this has happened to me for the first time. I chose normal reboot and then even the phone was working fine. But now, things have gone worse. I entered fastboot menu again and by mistake chose factory option instead of recovery. Phone started rebooting i think. As i had installed LiveLog app on my phone all I could see was logs on the screen. I waited for around 45 minutes but phone didnt boot up. I switched off and restarted again but same result. I think it is bricked. Is there any way I can get my phone back to working state? Any kind of help would be appreciated.
Thanks.
[Q] URGENT.. Help me unbrick my HTC ONE X topic
Please help , ITS VERY URGENT...
My HTC ONE X is rooted unlocked and S-OFF
I was about to install ARHD latest ROM. I went to flash boot.img first.
The moment I clicked on "install-boot-windows.bat" in FASTBOOT USB mode, everything just froze.
No button works. My computer gives a message of " USB DEVICE NOT RECOGNISED" .
When I try to give any command from Fastboot or ALL IN ONE TOOL KIT, IT SAYS " waiting for device" .
My phone is stuck at FASTBOOT USB screen.
please help as fast as possible. I can't wait for my device to die.
I am attaching the snapshot of my current phone screen...
My HTC ONE X is rooted unlocked and S-OFF
I was about to install ARHD latest ROM. I went to flash boot.img first.
The moment I clicked on "install-boot-windows.bat" in FASTBOOT USB mode, everything just froze.
No button works. My computer gives a message of " USB DEVICE NOT RECOGNISED" .
When I try to give any command from Fastboot or ALL IN ONE TOOL KIT, IT SAYS " waiting for device" .
My phone is stuck at FASTBOOT USB screen.
please help as fast as possible. I can't wait for my device to die.
I am attaching the snapshot of my current phone screen...
[Q] Unbrick Transformer topic
Hello at all!
In the beginning I want to tell you that I'm no native speeker, so please excuse me when my language is a little bit strange ;)
I'm here to ask you for help to unbrick my Aszs TF300. I have the following problems:
a) I can not mount internal sd card, but I can mount my external sd card as /system
b) everytimes when I start my tablet (just holding the power button) it boots into recovery (TWRP 2.6.3)
c) adb and fastboot don't see my Tablet
I searched for the mistake and found out, that my Tablet is bricked. But it is still possible to move files from the external SD card to the SD card, but they are lost when I reboot. Additionally I can use an Android terminal command.
Is there any way how to repair it (for free)? I had the following idea: It is possible to tell the Transformer to use the external SD card as internal SD card? Maybe I can install a new Android version on the external card and so I'm able to boot? Are there any other ideas?
Currently the tablet is dead... so I'm open for ANY idea and I would be very happy if someone could give me a tip. :cowboy:
Thank you very much for reading! :good:
best regards
Trolli1991
In the beginning I want to tell you that I'm no native speeker, so please excuse me when my language is a little bit strange ;)
I'm here to ask you for help to unbrick my Aszs TF300. I have the following problems:
a) I can not mount internal sd card, but I can mount my external sd card as /system
b) everytimes when I start my tablet (just holding the power button) it boots into recovery (TWRP 2.6.3)
c) adb and fastboot don't see my Tablet
I searched for the mistake and found out, that my Tablet is bricked. But it is still possible to move files from the external SD card to the SD card, but they are lost when I reboot. Additionally I can use an Android terminal command.
Is there any way how to repair it (for free)? I had the following idea: It is possible to tell the Transformer to use the external SD card as internal SD card? Maybe I can install a new Android version on the external card and so I'm able to boot? Are there any other ideas?
Currently the tablet is dead... so I'm open for ANY idea and I would be very happy if someone could give me a tip. :cowboy:
Thank you very much for reading! :good:
best regards
Trolli1991
[HOW TO] Update Moto G XT1034 (GPE) to Android 5.0.1 and Unbrick 5.0.1 failed OTA topic
Le'ts start from the basics and what will you find in this guide:
1.- Convert Moto G XT1034 to Google Play Edition 5.0.1
2.- Apply Lollipop 5.0.1 OTA Update (Moto G XT1034 GPE Converted ONLY)
3.- Update Moto G XT1034 GPEc 4.4.4 to 5.0.1 without softbricks or Data Loss
4.- Unbrick and Update Moto G XT1034 (GPEc) From 4.4.4 to 5.0.1
Requirements:
Moto G XT1034
ADB and Fastboot on your PC and basic knowledge on how to use it.
Unlocked Bootloader
Note: GPEc means Moto G XT1034 Google Play Edition converted
1.- How To Convert Moto G XT1034:
This is pretty simple and you should go here and use MotoTool, it will convert your Phone from XT1034 to Google Play Edition 4.4.2
2.- After following the Step 1 and converting your Moto G XT1034 to GPE follow these steps to ensure a propper update to Lollipop:
a. Boot Moto G into GPEc 4.4.2 and complete setup
b. You will not have signal but that's ok, go straight to settings-About phone-System Update and update to 4.4.4 through OTA (well first connect to a WiFi Network)
c. Let the Update finish and boot into 4.4.4 (still no signal on your phone nor your SIM card is recognized, that's PERFECT)
d. Do the Same as step b, Settings- About Phone- System Update and update to 5.0.1 through OTA
e. Let the Lollipop update finish (it does take like 20 min). Boot and you will not have signal nor your SIM Card Recognized. To gain signal and Data connection boot to bootloader and follow these commands:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
Note: if you don't find the OTA Update from 4.4.4 to 5.0.1 download in the System Update section download OTA Zip File from here and follow this guide to flash it, then proceed to step e.
3. So, the reason why when you update from 4.4.4 to 5.0.1 through OTA with a Moto G XT1034 GPEc (for those who had their phone converted and with signal) is that during the update recovery returns a Status 7 error from being a wrong device (XT1034 not XT1032) as a result from flashing either the modem or FSG File to obtain signal previous to 5.0.1 Update.
If you are in 4.4.4 with signal and want to update to 5.0.1 without losing your data or getting a softbrick follow these steps:
a. Flash stock GPE FSB File, reboot to bootloader and follow the commands.
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
b. Boot your phone (you will not have signal or data or SIM recognized, EXCELLENT). Go to System- About Phone- System Update and apply the 5.0.1 OTA
c. Wait for the 5.0.1 update to finish and phone to boot, reboot to bootloader and do these commands:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
4.- If you are in this number is because you went blazing guns for the 5.0.1 OTA got stuck on a bootloop and soft brick, evertybody told you were lost, hopeless and screwed....not quite there. Follow the steps
a.- Flash stock GPE FSB File, reboot to bootloader and follow the commands.
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
b. Download OTA Zip File from here and follow this guide to flash it
c. Let the 5.0.1 update finish, you will not have signal, data nor your SIM Card recongnized, boot to Bootloader and follow these commands:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
That should fix your problem, I recommend holding a little bit on future OTA's or just flash Stock GPE FSG before OTA and then the XT1034 FSG. For some of you the Stock XT1034 FSG that I linked may not work (depends on your carrier) if that is the case just download a stock ROM for your carrier, unzip it and copy the FSG
Remember to hit thanks :)
1.- Convert Moto G XT1034 to Google Play Edition 5.0.1
2.- Apply Lollipop 5.0.1 OTA Update (Moto G XT1034 GPE Converted ONLY)
3.- Update Moto G XT1034 GPEc 4.4.4 to 5.0.1 without softbricks or Data Loss
4.- Unbrick and Update Moto G XT1034 (GPEc) From 4.4.4 to 5.0.1
Requirements:
Moto G XT1034
ADB and Fastboot on your PC and basic knowledge on how to use it.
Unlocked Bootloader
Note: GPEc means Moto G XT1034 Google Play Edition converted
1.- How To Convert Moto G XT1034:
This is pretty simple and you should go here and use MotoTool, it will convert your Phone from XT1034 to Google Play Edition 4.4.2
2.- After following the Step 1 and converting your Moto G XT1034 to GPE follow these steps to ensure a propper update to Lollipop:
a. Boot Moto G into GPEc 4.4.2 and complete setup
b. You will not have signal but that's ok, go straight to settings-About phone-System Update and update to 4.4.4 through OTA (well first connect to a WiFi Network)
c. Let the Update finish and boot into 4.4.4 (still no signal on your phone nor your SIM card is recognized, that's PERFECT)
d. Do the Same as step b, Settings- About Phone- System Update and update to 5.0.1 through OTA
e. Let the Lollipop update finish (it does take like 20 min). Boot and you will not have signal nor your SIM Card Recognized. To gain signal and Data connection boot to bootloader and follow these commands:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
Note: if you don't find the OTA Update from 4.4.4 to 5.0.1 download in the System Update section download OTA Zip File from here and follow this guide to flash it, then proceed to step e.
3. So, the reason why when you update from 4.4.4 to 5.0.1 through OTA with a Moto G XT1034 GPEc (for those who had their phone converted and with signal) is that during the update recovery returns a Status 7 error from being a wrong device (XT1034 not XT1032) as a result from flashing either the modem or FSG File to obtain signal previous to 5.0.1 Update.
If you are in 4.4.4 with signal and want to update to 5.0.1 without losing your data or getting a softbrick follow these steps:
a. Flash stock GPE FSB File, reboot to bootloader and follow the commands.
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
b. Boot your phone (you will not have signal or data or SIM recognized, EXCELLENT). Go to System- About Phone- System Update and apply the 5.0.1 OTA
c. Wait for the 5.0.1 update to finish and phone to boot, reboot to bootloader and do these commands:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
4.- If you are in this number is because you went blazing guns for the 5.0.1 OTA got stuck on a bootloop and soft brick, evertybody told you were lost, hopeless and screwed....not quite there. Follow the steps
a.- Flash stock GPE FSB File, reboot to bootloader and follow the commands.
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
b. Download OTA Zip File from here and follow this guide to flash it
c. Let the 5.0.1 update finish, you will not have signal, data nor your SIM Card recongnized, boot to Bootloader and follow these commands:
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
Use THIS FSG File:
https://drive.google.com/file/d/0Bzp...ew?usp=sharing
That should fix your problem, I recommend holding a little bit on future OTA's or just flash Stock GPE FSG before OTA and then the XT1034 FSG. For some of you the Stock XT1034 FSG that I linked may not work (depends on your carrier) if that is the case just download a stock ROM for your carrier, unzip it and copy the FSG
Remember to hit thanks :)
Need help to unbrick my phone.... topic
Hello guys, last week my cell phone was working perfectly, suddently the phone lost the signal, was allways without signal. I was using CyanFox 2.0.2 at that momment. I changed to SlimKat 4.4.4 but still the same issue. A friend suggested me to flash the 20C kdz. I tried the normal, with KDZ_FW_UPD, following the instructions that i read in another post. Everything was going ok, but it stopped in wParam = 2010, lParam = 210.
After that, the cell phone just go to S/W Upgrade mode, even if a try any combination of keys. I have tried to many methods to unbrick my phone without any success..... Please i need Help!!!!!!!!
I have tried the 10B, 10H, 20B and 20C kdz.
After that, the cell phone just go to S/W Upgrade mode, even if a try any combination of keys. I have tried to many methods to unbrick my phone without any success..... Please i need Help!!!!!!!!
I have tried the 10B, 10H, 20B and 20C kdz.
[Q] Please help me to unbrick my device topic
Guys,
My device is htc desire 310 dual mtk6582m.. I have been trying to mod the framework-res.apk. unfortunately my device got bricked...
i dnt hav installed any custom recovery. i hav a pc installed windows 8.1... cant install mtk drivers... is there anyway to unbrick it using the stock recovery?
My device is htc desire 310 dual mtk6582m.. I have been trying to mod the framework-res.apk. unfortunately my device got bricked...
i dnt hav installed any custom recovery. i hav a pc installed windows 8.1... cant install mtk drivers... is there anyway to unbrick it using the stock recovery?
[q] how to unbrick lg p715? topic
i use lgp715 and its rooted
i want to partition my sd card without pc so i follow a step on youtube on how to partition in sd card without pc.. title is (partition sd card (increase internal memory)) it has a blogspot on the description... i download and installed (skin1980-gt-s5360 cwm) and use clockworkmods's "install and restart to recovery mode manually" and then the phone goes to recovery mode. I follow the steps above and lastly when i choose "reboot recovery" my phone restart -> then it goes to lg logo --> then logo disappears --> but the screen light is on(screen light is on in 5 minutes) so i thought nothing gonna happen so I remove its battery put it back and try to restart it but then it never turn on... and now i connect it on laptop to use emergency mode but laptop cant read it (driver not found)... its not working at all… why?
i want to partition my sd card without pc so i follow a step on youtube on how to partition in sd card without pc.. title is (partition sd card (increase internal memory)) it has a blogspot on the description... i download and installed (skin1980-gt-s5360 cwm) and use clockworkmods's "install and restart to recovery mode manually" and then the phone goes to recovery mode. I follow the steps above and lastly when i choose "reboot recovery" my phone restart -> then it goes to lg logo --> then logo disappears --> but the screen light is on(screen light is on in 5 minutes) so i thought nothing gonna happen so I remove its battery put it back and try to restart it but then it never turn on... and now i connect it on laptop to use emergency mode but laptop cant read it (driver not found)... its not working at all… why?
[q] how to unbrick lgp715? topic
i use lgp715 and its rooted
i want to partition my sd card without pc so i follow a step on youtube on how to partition in sd card without pc.. title is (partition sd card (increase internal memory)) it has a blogspot on the description... i download and installed (skin1980-gt-s5360 cwm) and use clockworkmods's "install and restart to recovery mode manually" and then the phone goes to recovery mode. I follow the steps above and lastly when i choose "reboot recovery" my phone restart -> then it goes to lg logo --> then logo disappears --> but the screen light is on(screen light is on in 5 minutes) so i thought nothing gonna happen so I remove its battery put it back and try to restart it but then it never turn on... and now i connect it on laptop to use emergency mode but laptop cant read it (driver not found)... its not working at all… why?
i want to partition my sd card without pc so i follow a step on youtube on how to partition in sd card without pc.. title is (partition sd card (increase internal memory)) it has a blogspot on the description... i download and installed (skin1980-gt-s5360 cwm) and use clockworkmods's "install and restart to recovery mode manually" and then the phone goes to recovery mode. I follow the steps above and lastly when i choose "reboot recovery" my phone restart -> then it goes to lg logo --> then logo disappears --> but the screen light is on(screen light is on in 5 minutes) so i thought nothing gonna happen so I remove its battery put it back and try to restart it but then it never turn on... and now i connect it on laptop to use emergency mode but laptop cant read it (driver not found)... its not working at all… why?
Inscription à :
Articles (Atom)