Hello All!
My first post here, even though I have long been a lurker. I hope I'm posting in the right place. If not, apologies, and Mods - please redirect me, and I shall re-post in the correct place.
Phone: SAMSUNG GALAXY S3 GT-I9300 International version
Last known installed/running OS: Official SAMSUNG JB ROM (Unsure WHICH version) after having run on CM 4.4 for a couple of weeks.
PROBLEM:
a few months after going back to stock, Phone suddenly developed issues of random reboots. These would happen at any point in time, with no predictability whatsoever. One fine day, it rebooted, and wouldn't get past the Samsung splash screen. Pulling the battery and trying to restart phone resulted in the same stuck at Samsung logo issue.
Left the phone alone for a couple of months after this as I had a spare, but finally decided to try and revive the S3.
Phone does not charge when connected to charger. At least, it shows no visible signs of it. It DOES, however, try booting itself when plugged in, but gets stuck on the first screen of ODIN Download mode, instead of the Samsung logo splash screen as it used to earlier. Also note that this screen it gets stuck on is a pixellated screen, not the clear normally seen screen when entering ODIN mode.
The Vol UP, Home and power button combo brings me to this very same screen, there is no recovery menu to be seen, as would be normally. The Vol DOWN, Home and power button combo brings me to the regular clear ODIN mode as usual.
The headings at this screen read:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
I have read through most posts regarding similar issues on XDA as well as other forums, and tried flashing stock firmwares (single AND multiple part ones) through ODIN, with no success. The error i always get is as in the attached screen captures.
I've tried ALL versions of ODIN, and many PIT files. All were failures.
So, is this a dead for all purposes phone, or do I still have hope since ODIN mode is still available?
I don't think USB debugging was checked before bricking, because ADB toolkits just keep waiting for phone to be detected.
All drivers are up to date and installed correctly. Kies is not installed.
Any help is welcome.
My first post here, even though I have long been a lurker. I hope I'm posting in the right place. If not, apologies, and Mods - please redirect me, and I shall re-post in the correct place.
Phone: SAMSUNG GALAXY S3 GT-I9300 International version
Last known installed/running OS: Official SAMSUNG JB ROM (Unsure WHICH version) after having run on CM 4.4 for a couple of weeks.
PROBLEM:
a few months after going back to stock, Phone suddenly developed issues of random reboots. These would happen at any point in time, with no predictability whatsoever. One fine day, it rebooted, and wouldn't get past the Samsung splash screen. Pulling the battery and trying to restart phone resulted in the same stuck at Samsung logo issue.
Left the phone alone for a couple of months after this as I had a spare, but finally decided to try and revive the S3.
Phone does not charge when connected to charger. At least, it shows no visible signs of it. It DOES, however, try booting itself when plugged in, but gets stuck on the first screen of ODIN Download mode, instead of the Samsung logo splash screen as it used to earlier. Also note that this screen it gets stuck on is a pixellated screen, not the clear normally seen screen when entering ODIN mode.
The Vol UP, Home and power button combo brings me to this very same screen, there is no recovery menu to be seen, as would be normally. The Vol DOWN, Home and power button combo brings me to the regular clear ODIN mode as usual.
The headings at this screen read:
ODIN MODE
PRODUCT NAME: GT-I9300
CUSTOM BINARY DOWNLOAD: No
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
I have read through most posts regarding similar issues on XDA as well as other forums, and tried flashing stock firmwares (single AND multiple part ones) through ODIN, with no success. The error i always get is as in the attached screen captures.
I've tried ALL versions of ODIN, and many PIT files. All were failures.
So, is this a dead for all purposes phone, or do I still have hope since ODIN mode is still available?
I don't think USB debugging was checked before bricking, because ADB toolkits just keep waiting for phone to be detected.
All drivers are up to date and installed correctly. Kies is not installed.
Any help is welcome.
Aucun commentaire:
Enregistrer un commentaire