{HELP} No signal/baseband EE topic

Ok, so I unboxed my new phone UK (XT1092), unlocked the bootloader after it updated to Lollipop, and messed up somewhere causing me to have to install stock rom again. After installing the stock rom (4.4.4) I do not have signal and the baseband is unknown as with the OP. I have attemped to follow multiple guided concerning the same fixes but have gotten no where and am now extremely stressed and confused. Previously if I had problems with signal I just reflash a radio but times seem to have changed. The phone now shows as a xt1095 when plugged into pc.
Where I went having messed up:
[URL="http://forum.xda-developers.com/moto-x-2014/general/guide-update-xt1095-pure-edition-to-t2937074"]

Where I then went having found I had a xt1092

Quote:

Update on xt1092 worked! I did this: 1. Downloaded the 4.4.4 system image from xt1905 (first post for download link) 2. Extracted the zip 3. flashed over mfastboot.exe Code: mfastboot flash logo logo.bin mfastboot flash boot boot.img mfastboot flash recovery recovery.img mfastboot flash system system.img mfastboot flash modem NON-HLOS.bin mfastboot flash fsg fsg.mbn mfastboot erase cache mfastboot erase userdata 4. sideloaded the OTA update from first post 5. reboot 6. flashed back the original modem and fsg from xt1902, without erasing modemst1 and modemst2 -> https://www.androidfilehost.com/?fid=95784891001608300

Then realising I had no signal I followed this post:

Quote:

YES! I finally have Lollipop on my XT1092!! I followed steff999's guide but encountered several problems with the modem and data connections etc. I just couldn't figure out why flashing the XT1092 modem files didn't work. Then I went back to my original firmware and did the procedure again. But now I did not let it boot after the OTA Update and directly booted into fastboot mode and flashed the modem and fsg files. Then after reboot I immediately had mobile service. IMEI and Baseband is back again. I use Linux and it is very easy with Linux. In a terminal just go to the folder with the files (no matter where they are!!). After getting Android SDK I did: Code: $ sudo apt-get install android-tools-fastboot <<-- to install fastboot $ cd /directory with your files...<<--- choose your folder $ fastboot flash logo logo.bin etc after flashing the files put OTA.zip on phone. Go in recovery mode and apply update. Then when it reboots directly go in fastboot mode and type: $ cd /directory with your XT1092 modem files/ $ fastboot flash modem NON-HLOS.bin $ fastboot flash fsg fsg.mbn $ fastboot reboot now it boots into lollipop and it should recognize your sim card. This is how it worked for me with Linux. Should be similar with Windows but I think the files for flashing have to be in fastboot directory then. I did not use erase modem commands I hope this will give hope back to people who encountered similar problems with the modem. I was about to give up but decided to give it a last try.

I am unsure how to get the OTA update onto the phone memory unless I power up and download, attempt at sideloading via adb resulted in the phone "aborting" at 100% sent.
So, could someone here please attempt to explain exactly what needs to be done :(

Currently about phone:
Android version: 5
Baseband version: unknown
System: 22.21.11.victara_tmo.tmo.en.US.retgb
Build number: LXE22.46-11
kernal: 3.4.42-gd7d30ea

Please.