I unlock this phone before 2 months ago.
its firmware ver was 4.3. today client told me he face some network problem.
So i try to make repair NVM after then
phone only restart.
i try to make flash with this firmware " N900AUCUBMI9_N900AATTBMI9_ATT_Android_4.3 "
But flashing was failed.
then i flash the phone with this pit file " MSM8974_N900AUCUBMI1 "
after then i am unable to go to recovery mode. and then i flash the phone with
" N900AUCECMLG_USA(ATT)_Android_4.4.2.oct "
i flash the phone OCTOPUS box . here is the log :
but phone still is in restarting, hang on logo.
here is the screen shot when flashing is continue with Octopus Box.
Please suggest me something........
its firmware ver was 4.3. today client told me he face some network problem.
So i try to make repair NVM after then
phone only restart.
i try to make flash with this firmware " N900AUCUBMI9_N900AATTBMI9_ATT_Android_4.3 "
But flashing was failed.
then i flash the phone with this pit file " MSM8974_N900AUCUBMI1 "
after then i am unable to go to recovery mode. and then i flash the phone with
" N900AUCECMLG_USA(ATT)_Android_4.4.2.oct "
i flash the phone OCTOPUS box . here is the log :
Code:
Selected firmware file: N900AUCECMLG_USA(ATT)_Android_4.4.2.oct
Please put the phone into Download Mode and connect USB cable.
To put SM-N900A into Download Mode, You have to perform the
following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Found phone on
Firmware write started.
Writing ABOOT section...
ABOOT section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing APNHLOS section...
APNHLOS section has been written successfully.
Writing PERSIST section...
PERSIST section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing RPM section...
RPM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing DBI section...
DBI section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing TZ section...
TZ section has been written successfully.
Writing USERDATA section...
USERDATA section has been written successfully.
Firmware writing successfully completed.here is the screen shot when flashing is continue with Octopus Box.
Please suggest me something........
Aucun commentaire:
Enregistrer un commentaire