[ROOT+CWM] Iberry Auxus One (SPFT Method) topic

*****Root with SPFT Flash Tool Method*****
for iBerry Auxus One
[EASY ROOT METHOD]

Guys. Now we have our own first Root Method for AUXUS ONE STOCK ROM.
This method is successfully tested by me on Windows 7.

For more help visit this FB page too.
https://www.facebook.com/groups/AuxusOne/

Installation Instructions

Warning: Do at your own risk. Disconnection due to poor cable or Electricity Supply failure can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.

Disable Antivirus so that it cannot interfere with the flashing process

1) Download flashable zip file named UPDATE-SuperSU-v2.40.zip and save in root of your SDCard

2) Download and extract the Auxus ONE CWM Recovery Flash Package on desktop or anywhere on your pc.

Install Phone Driver (From the Driver folder you have just extracted).

3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .

After driver installation is done disconnect phone from pc and reboot your pc.

4) Run as Administrator the "Flash_Tool.exe" from SPTools folder inside that folder you extracted.

5) Keep only One File checked (selected) as shown in following image (Recovery.img). If options are not seen then click on "Scatter-loading" button at top-right side and select "One_MT6592_Android_scatter.txt" file from extracted folder. Now be sure only one options (RECOVERY.IMG) selected as mentioned in following image. Unselect all other options.

Now PRESS "Download" button at top.

6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.

After flashing is done, the GREEN tick mark will be shown as shown in image below.

7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.

To start phone in recovery mode press "VOLUME UP" button and "POWER" when Auxus Logo appears release "POWER" button keeping "VOLUME UP" button pressed until phone starts in CWM Recovery mode.

8) Important: Now install/flash "UPDATE-SuperSU-v2.40.zip" in Recovery mode and Reboot phone in system (normal) mode

Done. Enjoy Press :good: thanks if you liked my work.

IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.

Attached Thumbnails