I am having problem flashing roms my Micromax a68.
The phone is rooted with Kingroot and have Kinguser and busybox installed.
I have installed the Lewa recovery image too.
For flashing the rom, I copied the rom "Cyanbook v0.4" to the sd card in my phone, switched on the phone in recovery mode, cleared out the factory, dalvik cache and caches and then installed the rom.
The rom gets fully installed and a notification on the screen says "Reboot to enjoy Cyanbook". Then I'm rebooting.
The phone starts with the welcome graphics, then after a while, the menu,home and back buttons under the screen lights up and the phone gives a slight vibration.
Now everything till this is as per the protocol as after the vibration, the screen enters the OS.
But the thing here is, even after the vibration, the screen is stuck at the welcome graphics and is not going into the OS.
I tried a different version of the rom and that also gave similar problem.
Now..after this, i tried to reboot the phone, the phone reboots as per norms automatically with the previous OS which was there before i installed the rom.
It would be great if you could give the solution step by step as i am not an expert or anything :)
N.B- 1. These roms worked perfectly before, but recently i had a brick and had to give the phone to an engineer who used a box to install a stock rom in the phone.
2. I dont think its a regular still boot screen problem, as in those times the phone buttons dint light up, neither was there the vibration.
The phone is rooted with Kingroot and have Kinguser and busybox installed.
I have installed the Lewa recovery image too.
For flashing the rom, I copied the rom "Cyanbook v0.4" to the sd card in my phone, switched on the phone in recovery mode, cleared out the factory, dalvik cache and caches and then installed the rom.
The rom gets fully installed and a notification on the screen says "Reboot to enjoy Cyanbook". Then I'm rebooting.
The phone starts with the welcome graphics, then after a while, the menu,home and back buttons under the screen lights up and the phone gives a slight vibration.
Now everything till this is as per the protocol as after the vibration, the screen enters the OS.
But the thing here is, even after the vibration, the screen is stuck at the welcome graphics and is not going into the OS.
I tried a different version of the rom and that also gave similar problem.
Now..after this, i tried to reboot the phone, the phone reboots as per norms automatically with the previous OS which was there before i installed the rom.
It would be great if you could give the solution step by step as i am not an expert or anything :)
N.B- 1. These roms worked perfectly before, but recently i had a brick and had to give the phone to an engineer who used a box to install a stock rom in the phone.
2. I dont think its a regular still boot screen problem, as in those times the phone buttons dint light up, neither was there the vibration.
Aucun commentaire:
Enregistrer un commentaire