[GUIDE] How to flash CWM or TWRP recovery and root your device! :)
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device. This will definitely brick your device which is normal but follow the right instructions to make it work again.
Credits: This root method was found from a facebook group that uses this phone, i am just posting it here. Give thanks to Eduardo Perez!
I ported TWRP recovery for this device and Eduardo did the CWM recovery. Also thank rua1 from XDA for his MTK droid tools. Koush for his driver installer.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
1. A windows PC
2. MTK Droid tools
3. SP flash tools
4. CWM or TWRP recovery
5. Universal ADB driver
6. MTK preloader driver
[GUIDE] FLASH CWM/TWRP
1. Download the attached files below and extract them anywhere on your computer.
2. Extract Mtk VCOM drivers and install it. This is for the preloader drivers which will be used later.
3. Install ADB driver. Go to settings, then development if you don't see development go in about and click on the build number 7 times to enable development mode. Enable USB debugging.
4. Extract any other files in the folder and then go to SP flash tools
5. Disable any antivirus program and maybe turn off UAC.
6. Run flashtool.exe as administrator.
7. If anything pops up just ignore it and click ok.
8. Go to scatter loading and click it, locate the scatter file from the extracted folder and open it.
9. When it opens click on the recovery option and click the check box.
10. Decide which recovery you want and rename it to recovery.img.
11. Click on the location in the same recovery option and choose your recovery.img
12. Turn off your phone and take out the battery.
13. Click on Download and then connect the phone to the PC.
14. If you did everything i said above, it will flash your chosen recovery.img and you will have a custom recovery.
[GUIDE] ROOT/Superuser
1. Reinsert the battery and turn on the phone.
2.Place the root_grouper-tilapia_4.4_update.zip and superuser.zip on your sdcard or internal storage.
3. Turn off the phone and boot it into recovery mode.
4. Navigate using the volume keys for CWM recovery or just use touch for TWRP. Use the power button to select.
5.Select install zip from sdcard and choose zip from sdcard. Locate the zip files that you sent.
6. Flash the root_grouper-tilapia_4.4_update.zip first then flash the superuser.zip
7. Reboot your phone and there you go. Root Access :D
SP FLASH TOOLS https://www.sendspace.com/file/l13rgk
MTK DROID TOOLS https://www.sendspace.com/file/rpm6so
ADB DRIVER http://adbdriver.com/downloads/
Disclaimer: Your warranty is now void. You do this in your own risk. I do not take any responsibility to your device. This will definitely brick your device which is normal but follow the right instructions to make it work again.
Credits: This root method was found from a facebook group that uses this phone, i am just posting it here. Give thanks to Eduardo Perez!
I ported TWRP recovery for this device and Eduardo did the CWM recovery. Also thank rua1 from XDA for his MTK droid tools. Koush for his driver installer.
BACKUP YOUR DEVICE BEFORE DOING ANYTHING IN THE EVENT SOMETHING GOES WRONG.
Requirements:
1. A windows PC
2. MTK Droid tools
3. SP flash tools
4. CWM or TWRP recovery
5. Universal ADB driver
6. MTK preloader driver
[GUIDE] FLASH CWM/TWRP
1. Download the attached files below and extract them anywhere on your computer.
2. Extract Mtk VCOM drivers and install it. This is for the preloader drivers which will be used later.
3. Install ADB driver. Go to settings, then development if you don't see development go in about and click on the build number 7 times to enable development mode. Enable USB debugging.
4. Extract any other files in the folder and then go to SP flash tools
5. Disable any antivirus program and maybe turn off UAC.
6. Run flashtool.exe as administrator.
7. If anything pops up just ignore it and click ok.
8. Go to scatter loading and click it, locate the scatter file from the extracted folder and open it.
9. When it opens click on the recovery option and click the check box.
10. Decide which recovery you want and rename it to recovery.img.
11. Click on the location in the same recovery option and choose your recovery.img
12. Turn off your phone and take out the battery.
13. Click on Download and then connect the phone to the PC.
14. If you did everything i said above, it will flash your chosen recovery.img and you will have a custom recovery.
[GUIDE] ROOT/Superuser
1. Reinsert the battery and turn on the phone.
2.Place the root_grouper-tilapia_4.4_update.zip and superuser.zip on your sdcard or internal storage.
3. Turn off the phone and boot it into recovery mode.
4. Navigate using the volume keys for CWM recovery or just use touch for TWRP. Use the power button to select.
5.Select install zip from sdcard and choose zip from sdcard. Locate the zip files that you sent.
6. Flash the root_grouper-tilapia_4.4_update.zip first then flash the superuser.zip
7. Reboot your phone and there you go. Root Access :D
SP FLASH TOOLS https://www.sendspace.com/file/l13rgk
MTK DROID TOOLS https://www.sendspace.com/file/rpm6so
ADB DRIVER http://adbdriver.com/downloads/
Aucun commentaire:
Enregistrer un commentaire